Posts

Do you or someone you know avoid the news? After reading this article from the Nieman Journalism Lab, reflect on how you might change that perspective.

/in /by

Avoid the news

Do you or someone you know avoid the news? After reading this article from the Nieman Journalism Lab, reflect on how you might change that perspective.

  • Link:  https://search-proquest-com.norcocollege.idm.oclc.org/usnews/docview/2251674003/C325BEC955345E4PQ/3?accountid=130556

What do you think McLuhan would say about role the internet would play in our everyday lives?

/in /by

 Marshall McLuhan – Digital Prophecies

Description

What do you think McLuhan would say about role the internet would play in our everyday lives?

Al Jazeera provides an overview of Marshall McLuhan’s theory:  Marshall McLuhan – Digital Prophecies: The Medium is the Message

What strategy are they using? Do you think they will maintain this competitive advantage? Why or why not? Do they use —cost advantage or differentiation advantage?

/in /by

Module 06: Discussion – Strategic

Creating and Sustaining Competitive Advantage

Read Case 1 ( 🚀 Attached ): Peloton Interactive, Inc.: Creating New Market Space in the Home Fitness Sector (R. M. Grant, Contemporary Strategy Analysis, 11th edn., Wiley, 2022).

Remember that a case study is a puzzle to be solved, so before reading and discussing the specific case questions below, develop your proposed solution by following these five steps:

  1. Read the case study to identify the key issues and underlying issues. These issues are the principles and concepts of the course module which apply to the situation described in the case study.
  2. Record the facts from the case study which are relevant to the principles and concepts of the module. The case may have extraneous information not relevant to the current course module. Your ability to differentiate between relevant and irrelevant information is an important aspect of case analysis, as it will inform the focus of your answers.
  3. Describe in some detail the actions that would address or correct the situation. Make your response in Yellow
  4. Complete this initial analysis and then read the discussion questions. Typically, you will already have the answers to the questions but with a broader consideration. At this point, you can add the details and/or analytical tools required to solve the case. Make your response in Black.

Discuss your insights into the sustainability of Peloton’s competitive advantage.

  1. What strategy are they using? Make your response in Red.
  2. Do you think they will maintain this competitive advantage? Why or why not? Make your response in Orange
  3. Do they use —cost advantage or differentiation advantage? Make your response in Green.

Discuss the concepts, principles, and theories from the attached Slides. Cite and cite any other sources if appropriate. It’s a must.

Given a graph of (nodes and edges), find a path using the following algorithms: 1)Depth First Search 2) USC and 3) A*.

/in /by

Introduction to Artificial Intelligence

Assignment
You need to write a program (preferably in Java) to do the following:
Given a graph of (nodes and edges), find a path using the following algorithms:

  1. Depth First Search
  2. USC
  3. A*

Use the class Vertex for the graph nodes
Name of the node: use alphabetic to represent the names e.g., A, B etc….

You need to submit the following:

Driver program to (TestGraph.java):
1– Read a graph of nodes; you can use a text file to read the graph from. You may refer to the way of which graphs were represented in data structure course
2– Ask the user to find a path based on a choice of algorithm to use
3– The output should be:

  • a. The path given by the algorithm selected from point# 2
  • b. The cost of the path
  • c. The nodes that are explored on the order they are visited

The other java files needed to run your program

Note: if you are submitting multiple files, please compress them under the name of: You first name_ you last name_You ID_version

As depicted in the figure, input voltage is 120 Volts (RMS) and diode drops are 0.7 Volts. Design this circuit with given two outputs and calculate turns ratio of transformer.

/in /by
 

EE 309 Analog Electronics and Design Homework

Spring 2022-2023 Duration: 25/04/2023 15:00 – 28/04/2023 15:00
Q1 Q2 Q3 Q4 TOTAL
25 25 25 25 100
         
  1. As depicted in the figure, input voltage is 120 Volts (RMS) and diode drops are 0.7 Volts. Design this circuit with given two outputs and calculate turns ratio of transformer.
  • 10 V
  1. 100 V

 

  1. Consider a circuit using Si diodes and 10 k ohms resistors. Design this clipper circuit with output ranges below;
  2. -0.7 V and above
  3. +2.1 V and above
  • ±1.4 V
  1. As given in the figure a clamper circuit with the input signal Vi is proposed to design. Determine the output voltage with the exact solution step by step. Sketch transfer characteristic VO versus V

 

 

  1. A rectifier circuit with the excitation of is given. Assume the diodes are made of Silicon.Design this circuit and determine the turns ratio, PIV rating for the peak output voltage of;
  2. 25 V
  3. 100 V
  • Check the design and provide the results with Spice

 

  1. A regulator curcuit needs to be designed with an input power supply which has a nominal value of and can vary by ± %25 and nominal output voltage of 10 volts. For this purpose a zener diode is employed with specifications given; power rating of 1 W, 10 V drop at , output load current is to vary between -20 mA and zener resistance of
  2. If the minimum Zener current is to be , determine the required
  3. Determine the maximum variation in output voltage
  • Determine the regulation percent
    1. For the given network, input voltage having a maximum amplitude of  is applied to the circuit. (Note: All the diodes are Si).
      1. Sketch the output and calculate the dc (average) value of the output for the network.
      2. Draw, simulate and analyze the circuit by using PSpice

 

  1. A diode circuit is given with the input signal beside. (Use the resulting output voltage level of part a as Vp in this question)
  1. Determine the output voltage with the exact solution step by step.
  2. Sketch transfer characteristic VO versus Vi
  • Draw, simulate and analyze the circuit by using PSpice

 

 

 

 

    1. A GaAs diode with  is given as the configuration on figure
    2. Obtain analytical solution for each steps
    3. Draw output voltage waveform.
    4. Choose a resistance value for R(Select a value which provides practical rule)and plot wave form of current over resistance
    5. For which specific applications this design can be applied write your comments
    6. Draw, simulate and analyze the circuit by using PSpice

 

  1. [Research Question] Design a DC battery charger for an electrical vehicle which has a 96 V (nominal) BLDC hub motor which is plugged directly from grid to EV.
    1. Which type(s) of diode circuit(s) is(are) used for this device.
    2. Sketch the input and output waveforms
  • List the needed components for this design.
  1. Draw the example circuit.
  2. Explain the duty of each component.
  3. Draw, simulate and analyze the circuit by using PSpice.

Discuss the importance and structure of Financial Market in around (100 – 120) words?

/in /by

DISCUSSION

Discuss the importance and structure of Financial Market in around (100 – 120) words?

To which extent do you agree or disagree with the author point of view “that internal customers’ needs are important as externals to create a true quality environment” and Why?

/in /by

Quality Management (MGT 424)

Assignment Question(s):

  1. In your own words, summarize the article. ( 150 – 200 words ) ( 5 marks )
  2. To which extent do you agree or disagree with the author point of view “that internal customers’ needs are important as externals to create a true quality environment” and Why? ( 150 – 200 words ) ( 5 marks )
  3. Discuss the tools needed to operate within the new environment as indicated by the author. ( 150 – 200 words) ( 5 mark )

Provide a 2 pages single-spaced, discussion and synthesis of the three articles.

/in /by

Synthesis of 3 articles

Provide a 2 pages single-spaced, discussion and synthesis of the three articles. Be sure to include a thesis that states the main idea of your discussion and synthesis—this will likely be how the articles all relate to each other. You should also include supporting paragraphs with evidence from the articles that support your thesis, and suggestions for practical application and extension of the ideas from these articles. Finally, you should include a conclusion that ties everything together and raises new directions for researchers and practitioners to consider. It should NOT just summarize the articles.

How would Sheryl Sandberg’s leadership style be described based on the four Leadership Behavior styles? How does Sandberg’s book Lean In emphasize the three Content Motivation Theories? Explain.

/in /by

Facebook CEO Sheryl Sandberg’s Case Study

After reading Chapter 3, please review Facebook CEO Sheryl Sandberg’s Case Study at the end of the chapter. Then, respond in-depth to each of the following questions* listed on the textbook’s page 102 (the chapter’s theories and concepts should support your explanations for each question):

  • https://www.studypool.com/questions/download?id=2825890&path=uploads/questions/2859972/20230427210747case_reading.pdf&fileDownloadName=attachment_1

 

  • Question 1: How would Sheryl Sandberg’s leadership style be described based on the four Leadership Behavior styles?
  • Question 2: How does Sandberg’s book Lean In emphasize the three Content Motivation Theories? Explain.
  • Question 3: How does Sandberg’s book Lean In emphasize the three Process Motivation Theories? Explain.
  • Question 4: Which type and schedule of Reinforcement will help women advance in business?
  • Question 6: What Managerial Leadership skills does Sandberg need as CEO of Facebook? (Chapter 1)

*NOTE: The textbook’s Questions #5 and #7 are out of this assignment on purpose.

The force per meter between the two wires of a jumper cable being used to start a stalled car is 0.225 N/m. (a) What is the current in the wires, given they are separated by 2.00 cm? (b) Is the force attractive or repulsive?

/in /by

Physics Homework#1, T,3

Answer the following questions (show your full work)

  1. Use the diagram given to find the force per unit length between the two wires shown.

 

  1. The distance between two parallel wires carrying currents of 10 A and 20 A is 10 cm. Determine the magnitude and direction of the magnetic force acting on the length of 1 m of wires, if the currents are carried a) in the same direction, b) in the opposite direction.

 

  1. The force per meter between the two wires of a jumper cable being used to start a stalled car is 0.225 N/m. (a) What is the current in the wires, given they are separated by 2.00 cm? (b) Is the force attractive or repulsive?

 

  1. The wire carrying 400 A to the motor of a commuter train feels an attractive force of 4.00 × 10−3 N/m due to a parallel wire carrying 5.00 A to a headlight. (a) How far apart are the wires? (b) Are the currents in the same direction?

 

  1. A 2.50-m segment of wire supplying current to the motor of a submerged submarine carries 1000 A and feels a 4.00-N repulsive force from a parallel wire 5.00 cm away. What is the direction and magnitude of the current in the other wire?